Well Pump And Repeater Placement For Efficient Farming

Justin Ross

The small farm isn't as strong as it has been in the past hundred years, but it's not impossible to manage one with the right technological advancements. If you want to maximize daylight, reduce muscle fatigue and get more work done in general, getting watering tasks as automated as possible can shave hours out of every day. As you plan your irrigation system, consider a few well pump and water repeater placement concerns that could help you get water down the fields and ready for any type of farm use.

Initial Well Access And Placement

The well is a centerpiece of farm life because it's a boon that makes all of your crops, livestock and even workers more healthy. A well allows you to water crops on-site instead of dealing with rural water. You'll either need to start digging on your own with a post hole digger or consider renting a well drilling service, but both are just part of a day's work or a day's pay if you shop around.

Once you have the well in place, you'll need a pump that makes life easier. City slickers beware: you don't want to use a hand pump here. Hand pumps are nice for decoration and nostalgia, but to get real work done, you'll need an electric pump.

Electric pumps can be run on rural power sources, solar power or both. These water pumps don't require much energy, so the power company cost won't be high at all as long as there's a power line that can reach your property. Getting a utility pole installed may be a bit more expensive, but is a one-time expense with an often cheap utility bill. While solar power panels are possible, you may be better off making both investments just to be safe.

The pump takes a lot of the heavy work away from your arms and pump a consistent number of gallons to the field. You can attach a hose to the pump and send the water to fields, reservoirs, watering holes or into other underground water sources to preserve water source health.

Repeaters For Going Further

When the hoses are getting stretched too far and the water seems weaker, you may be tempted to dig another hole for another well. It's not necessarily a bad idea and can be worth the time if you have a fast, affordable drilling service, but there's another way.

Repeater water pumps are pumps with two ports: input and output. You attach the water hose from the pump to the repeater pump and the water sprays out of the other side. Attach a second hose to the output port and you've got a longer stretch of water line that you can use.

There is a limit to the distance before water becomes weaker, but it depends on the strength of your first water pump. You'll need to weight the cost of repeater pumps against the time and cost of a second well, but if you're on a farm of less than 1000 acres, you may not need too many repeaters unless you're changing directions a lot.

Contact a well pump service to begin searching for pumps, repeaters and irrigation strategy that works for your unique farm needs. Contact experts like Seismic Drilling for more information.


Share